Note: 1. During the installation process, do not hit the surface of the shock absorber cylinder with heavy metal objects, and forcefully pull the dust cover welded on the outside of the shock absorber.
2. Use a shock absorber with a tapered rubber pad for vibration isolation, and use a backing plate to press down the section of the tapered rubber pad assembled in the inner holes at both ends of the lifting ring.
3. During the installation process, the surface of the rubber parts fitted with the shock absorber (such as the combination of buffer sleeves, etc.) shall not be damaged
4. After the shock absorber is installed, the thread of the connection part should be tightened according to the specified torque requirements of the whole vehicle to ensure that the connection part is fastened reliably and without loosening, and anti-rust paint should be applied to the fastening part.